GPEM2010 series Gigabit Network Management rail type industrial Ethernet switch meets iec61850-3 standard, supports up to 8 100m ports (up to 4 optical ports), and can be configured with 2 Gigabit por
GPEM2010 series Gigabit Network Management rail type industrial Ethernet switch meets iec61850-3 standard, supports up to 8 100m ports (up to 4 optical ports), and can be configured with 2 Gigabit ports with flexible photoelectric configuration. Its management functions are complete, including QoS, VLAN, IGMP snooping / GMRP, port trunking, SNMP V1 / V2 / V3, RSTP / STP, etc. Unique ringgo redundant ring network protocol, network link switching and recovery time less than 20ms, improve the reliability of the network. Redundant power supply input, wide temperature design, strong anti electromagnetic interference ability, can be widely used in industrial sites requiring high bandwidth.
It can support up to 8 100m electrical ports or 4 100m SC / St optical ports
Support two Gigabit SC / St / FC optical ports or electrical ports
Support RSTP / STP and private ring protocol (recovery time less than 20ms)
Support QoS, VLAN, IGMP snooping / GMRP and other management functions
Optional 24 V / 220 V power input
Standard &Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS
|
| Management |
SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, DHCP Client, File Management, Port Statistics
|
| Security |
Classification of User Permissions, Port Alarm and Power Supply Alarm
|
| Switch Function |
802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control
|
Unicast / Multicast
| Static Multicast , IGMP-Snooping |
Redundancy Protocol
|
GP-Ring, STP/RSTP
|
| Time Management |
SNTP
|
| Interface |
100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning Combo port: 10/100/1000Base-T(X) or 1000Base-FX Console port: CLI command line management port (RS-232), RJ45 Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output
|
LED Indicator |
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
|
Switch Property |
Transmission mode: store and forward MAC address: 8K Packet buffer size: 1Mbit Backplane bandwidth: 7.6G Switch time delay:<10μs
|
Power Requirement |
12~48VDC, 4-pin 7.62mm pitch terminal blocks dual power supply redundancy, non-polarity, reverse connection protection
|
Power Consumption | No-load: 7.4W@48VDC Full-load: 12.1W@48VDC |
Environmental Limit |
Operating temperature range: -40~75℃ Storage temperature range: -40~85℃ Relative humidity: 5%～95%（no condensation）
|
Physical Characteristic |
Housing: IP40 protection, metal Installation: DIN-Rail mounting Dimension (W x H x D): 43(W) x 130(H) x 95(D)mm Weight: 950g
|
Industrial Standard |
IEC 61000-4-2 (ESD), Level 3 Air discharge: ±8kV Contact discharge: ±6kV EN61000-4-4 (EFT)，Level 3 Power supply: ±2kV Ethernet port: ±500V Relay: ±2kV IEC 61000-4-5 (Surge), Level 3 Power supply: common mode±2kV, differential mode±1kV Ethernet port: ±2kV Relay: common mode±2kV, differential mode±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
|
Certification |
CE, FCC, RoHS
|
Warranty |
5 years |
| Available Models | Gigabit SFP Slot | 100M Fiber Port | 1000M Copper Port | Power Supply Range |
| GPEM2010-2GX8T-2D2 | 2 | 0 | 8 | 12~48VDC dual power supply |
GPEM2010-2GX8T-V2 | 2 | 0 | 8 | 220VAC power supply |
| GPEM2010-2GS2S6T-2D2 | 2 | 2 | 6 | 12~48VDC dual power supply |
| GPEM2010-2GS2S6T-V2 | 2 | 2 | 6 | 220VAC power supply |
| GPEM2010-2GS4S4T-2D2 | 2 | 4 | 4 | 12~48VDC dual power supply |
| GPEM2010-2GS4S4T-V2 | 2 | 4 | 4 | 220VAC power supply |