GP-AP1200 is a high-performance, high bandwidth, multi-function, outdoor industrial dual band wireless AP that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is based on 802.11n MIMO (multiple input multiple output) technology and adopts 2T2R architecture.
GP-AP1200 is a high-performance, high bandwidth, multi-function, outdoor industrial dual band wireless AP that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is based on 802.11n MIMO (multiple input multiple output) technology and adopts 2T2R architecture. The maximum bandwidth of dual frequency concurrent operation can reach 1167 Mbps, which can be widely used in medical treatment, underground pipe gallery, underground pipe gallery, etc School, park, scenic spot, playground and other outdoor and outdoor wireless network coverage, fully compatible with 802.11 a / B / g / N / AC protocol client equipment access.
Supports 802.11b/g/n and 802.11a/n/ac
Standard fat and thin integrated mode
Diversified access authentication methods
IP67 protection level
Standard &Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE802.11b/g/n/a/ac for WLAN IEEE802.11i for wireless security IEEE802.11r for fast roaming IEEE802.3af/at for PoE
|
| Operating Mode |
Route, AP, bridge, client
|
| Network Settings |
Intranet setting, outer network setting, wireless setting, roaming setting, wireless probe
|
Firewall (route mode) |
IP filtering, MAC filtering, URL filtering, port forwarding, ARP binding, DMZ setting
|
Radio Frequency
|
802.11b/g/n: 2.412GHz~2.4835GHz 802.11ac/n/a: 5.18GHz~5.825GHz RF power output: 20dBm Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
|
| Receiving Sensitivity | 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7 802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7 802.11g/a: -91dBm@6Mbps, -72dBm@54Mbps 802.11b: -93dBm@1Mbps, -87dBm@11Mbps 802.11ac：-84dBm@MCS0, -59dBm@MCS9 |
| Transmitting Power | 802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7 802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7 802.11g/a: 20dBm@6Mbps, 20dBm@54Mbps 802.11b: 20dBm@1Mbps, 20dBm@11Mbps 802.11ac: 20dBm@MCS0, 20dBm@MCS9 |
| Interface | WAN port: 1 10/100/1000Base-T(X) RJ45port, supports POE 48VDC input power supply LAN port: 1 10/100/1000Base-T(X) RJ45 port, supports PoE 48VDC power supply input Antenna: 2 2.4G N-type (Female) ports 2 5.8G N-type (Female) ports |
LED Indicator |
5.8G signal indicator, 2.4G signal indicator, network bridge indicator, running indicator, power supply indicator
|
Power Requirement |
POE 48VDC: support IEEE802.3af/at standard 12~48VDC (optional): support non-polarity, anti-reverse connection and 2A overcurrent protection
|
Power Consumption | No-load: ＜4.51W@12VDC Full-load: ＜7.90W@12VDC |
Environmental Limit |
Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%～95%(no condensation)
|
Physical Characteristic |
Housing: IP67 protection*, metal Installation: Wall mounting or pole mounting Weight: 3.19KG Dimension (L × W × H):210mm×210mm×58mm
|
Industrial Standard |
IEC61000-4-2 (ESD, electronic static discharge), Level 4 Air discharge: ±15kV Contact discharge: ±8kV IEC61000-4-4 (EFT, electrical fast transient ), Level 4 Power supply: ±4kV Signal: ±2kV IEC61000-4-5 (Surge), Level 4 Power supply: common mode±4kV, differential mode±2kV Ethernet interface: ±4kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Certification |
CE, FCC, RoHS
|
Warranty |
3 years |
