Indoor Wireless AP

GP-MB320 300M dual band indoor panel wireless AP

GP-MB320 is an enterprise class indoor panel AP with high performance and high speed. It can provide high-speed wireless services by using professional industrial grade high pass chips, The 2 * 2mimo

  • Model: GP-MB320

GP-MB320 is an enterprise class indoor panel AP with high performance and high speed. It can provide high-speed wireless services by using professional industrial grade high pass chips, The 2 * 2mimo architecture + ceramic antenna is adopted to make the coverage distance longer and the signal more stable. The low-power Poe solution of American system is adopted to reduce the heat emission. The intelligent roaming technology of our company is adopted to switch to the AP with strong signal in seconds when the signal is not good, so as to realize fast and senseless roaming switching. With a 100MB WAN / LAN port, the maximum wireless speed can reach 300mbps, the wireless environment is cleaner, the wireless access is more stable, the wireless access users are more, and the wireless speed is faster, It supports 2.4G frequency band, has longer wireless coverage distance and stronger through wall capability. It also supports intelligent channel analysis and automatic selection of optimal channel to reduce interference and delay, provide stable wireless network signal, support IEEE 802.3at standard Poe, and realize 100 + m network cable power supply.

GP-MB320 adopts the latest high pass customized chip optimization algorithm, which has the characteristics of strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc.

Support 802.11b/g/n standard

Integration mode of fat and thin

Diversified access authentication methods

Maximum access 64+

Hardware performance
CPU Qualcomm QCA9531
Flash 16MB 
DDR 128MB 
PA_2.4G RTC6649EX 
Maximum rate300Mbps 
Maximum support for wireless access


software function
Working modeAP (fat thin mode switching), universal relay, gateway mode, wireless ISP mode
Wireless functionSupport 4 SSIDs, hidden SSID, wireless encryption, wireless MAC address filtering, WiFi timing off function, multicast acceleration, user isolation, transmission power setting, and wireless client number limit
Network functionVLAN settings, DHCP server, cloud platform server
device managementBackup configuration information, restore configuration information, restore factory configuration information, restart including scheduled restart and immediate restart, firmware upgrade, time management including system display time and time synchronization, system log, support local unified management function
RF parameters
2.4G working frequency band2.4GHz – 2.484GHz 

2.4G WIFI transport protocol   

802.11 b / g / n
2.4G wireless power



802.11n HT20:MCS7\25±2dBm,MCS0\28±2dBm 

802.11n HT40:MCS7\24±2dBm,MCS0\27±2dBm 

2.4G receiving sensitivity





2.4G EVM

802. 11n:  ≤ -28 dB

802. 11g:  ≤ -25 dB 

802. 11b:  ≤ -10 dB 

Interface and power supply


Built in 2.4G omnidirectional antenna, gain: 5dBi

WAN1 10 / 100 adaptive WAN / LAN port, supporting Poe power supply
Status indicatorWAN 
power supplyPOE power
Supply voltagePOE48V
Maximum power consumption<10W
Environmental and physical performance
working temperature  -40 ~ 80℃
Storage temperature-45 ~ 85℃
Humidity (non concentrated)5%~ 95%(No condensation)
size86mm×86mm×30mm(length × width × height)
Installation and fixationL-shaped bracket with U-clamp; diameter of holding pole:Φ30 ~ 50mm 
Special design

IP67 protection level, electromagnetic shielding, wind protection, sun protection, shock proof and heat dissipation design 

MetInfo enterprise content manager system | MetInfo CMS