Wireless Client

900M wireless client

GP-CPE950 is a 900mbps outdoor high-performance industrial wireless CPE client. It uses industrial high-performance high-performance chip and external FRP omnidirectional antenna or plate-shaped direc

  • Model: GP-CPE950

GP-CPE950 is a 900mbps outdoor high-performance industrial wireless CPE client. It uses industrial high-performance high-performance chip and external FRP omnidirectional antenna or plate-shaped directional antenna, so that the radiation radius of receiving and transmitting can reach more than 500 meters. This product supports relay and wireless ISP functions, and can realize long-distance wireless access to the Internet. In addition, it also supports gateway and AP Function, suitable for wireless networking and wireless coverage.

GP-CPE950 adopts the latest high pass customized chip optimization algorithm, which has the characteristics of strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc. A large number of imported high specification industrial chips are used in the main board chip of the equipment. The sheet metal stamping shell and dust-proof treatment process are adopted and IP40 protection grade is achieved to ensure stable operation in harsh high temperature, high cold and high humidity environment.

Supports 802.11 a / N / AC

Standard fat and thin integrated mode

Diversified access authentication methods

2 * 2mimo architecture

Design of power supply connector for industrial terminal

Dc9-dc24 V wide voltage design

Hardware performance
CPU QCA9563+QCA9882+QCA8334 
Flash 16MB 
DDR 128MB 
PA_2.4G SKY65174-21 
Maximum rate900Mbps 
Maximum support for wireless access

100+

software function
Working modeAP (fat thin mode switching), universal relay, gateway mode, wireless ISP mode
Wireless functionSupport 4 SSIDs, hidden SSID, wireless encryption, wireless MAC address filtering, WiFi timing off function, multicast acceleration, user isolation, transmission power setting, and wireless client number limit
Network functionVLAN settings, DHCP server, cloud platform server
device managementBackup configuration information, restore configuration information, restore factory configuration information, restart including scheduled restart and immediate restart, firmware upgrade, time management including system display time and time synchronization, system log, support local unified management function
RF parameters
2.4G working frequency band2.4GHz – 2.484GHz 

2.4G WIFI transport protocol   

802.11 b / g / n
2.4G wireless power

802.11b:11M\27±2dBm,1M\29±2dBm

802.11g:54M\26±2dBm,6M\29±2dBm 

802.11n HT20:MCS7\25±2dBm,MCS0\28±2dBm 

802.11n HT40:MCS7\24±2dBm,MCS0\27±2dBm 

2.4G receiving sensitivity

802.11b:11M\-85dBm;1M\-94dBm 

802.11g:54M\-72dBm;6M\-90dBm 

802.11n:HT20:MCS7\-70dBm;MCS0\-88dBm 

802.11n:HT40:MCS7\-68dBm;MCS0\-86dBm 

2.4G EVM

802. 11n:  ≤ -28 dB

802. 11g:  ≤ -25 dB 

802. 11b:  ≤ -10 dB 

±20ppm
Interface and power supply

2.4G RF interface

N  *2 
WAN1 10 / 100 adaptive WAN / LAN port, supporting Poe power supply
Status indicatorWAN 
power supplyPOE power/DC12-24V
Supply voltagePOE48 / DC12 V
Maximum power consumption<10W
Environmental and physical performance
working temperature  -40 ~ 80℃
Storage temperature-45 ~ 85℃
Humidity (non concentrated)5%~ 95%(No condensation)
size160mm×100mm×31(length × width × height)
Installation and fixationL-shaped bracket with U-clamp; diameter of holding pole:Φ30 ~ 50mm 
Special design

IP40 protection level, electromagnetic shielding, wind protection, sun protection, shock proof and heat dissipation design 


MetInfo enterprise content manager system | MetInfo CMS