Explosion-proof Wireless AP

GP-AP1200-FB Gigabit wireless AP

GP-AP1200-FB is a high-performance, high bandwidth, multi-function, outdoor industrial explosion-proof dual band wireless AP that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is

  • Model: GP-AP1200-FB

GP-AP1200-FB is a high-performance, high bandwidth, multi-function, outdoor industrial explosion-proof dual band wireless AP that supports both 802.11b/g/n and 802.11a/n/ac standards. The equipment is based on 802.11n MIMO (multiple input and multiple output) technology, and adopts 2T2R architecture. The maximum band width of dual frequency concurrent operation can be up to 1167 Mbps, can be widely used in underground pipe gallery, petrochemical and other occasions of wireless network coverage, fully compatible with 802.11 a / B / g / N / AC protocol client equipment access.

A wireless module of GP-AP1200-FB supports 802.11b/g/n standard, operates at 2.4G frequency, has a maximum transmission power of 1000MW, and can cover more than 500m of sector antenna distance. The other wireless module supports 802.11a/n/ac standard, working at 5.8G frequency, with maximum transmission power of 1000MW. Compared with 2.4G frequency band, 5g channel has less occupation, more independent channels and strong anti-interference ability, which greatly improves the quality of wireless signal transmission, network bandwidth and stability. Under 11ac mode, the maximum bandwidth can reach 866mbps.

GP-AP1200-FB adopts the latest high pass customized chip optimization algorithm, which has the characteristics of strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the fat and thin integrated mode and graphic rapid configuration mode. The equipment adopts stainless steel explosion-proof shell and waterproof treatment process, and reaches IP67 protection level, so as to ensure stable operation in dust and high-risk flammable and explosive environment.

Supports 802.11b/g/n and 802.11a/n/ac standards

Integration mode of fat and thin

Diversified access authentication methods

IP67 protection level

Comply with ex diibt6gb

Hardware performance
CPU QCA9563 + QCA9886 +QCA8334
Flash 16MB 
DDR 128MB 
PA_2.4G SKY65174-21 
Maximum rate1200Mbps 
Maximum support for wireless access


software function
Working modeAP (fat thin mode switching), universal relay, gateway mode, wireless ISP mode
Wireless functionSupport 4 SSIDs, hidden SSID, wireless encryption, wireless MAC address filtering, WiFi timing off function, multicast acceleration, user isolation, transmission power setting, and wireless client number limit
Network functionVLAN settings, DHCP server, cloud platform server
device managementBackup configuration information, restore configuration information, restore factory configuration information, restart including scheduled restart and immediate restart, firmware upgrade, time management including system display time and time synchronization, system log, support local unified management function
RF parameters
2.4G working frequency band2.4GHz – 2.484GHz 
5.8G working frequency band5.150GHz ~ 5.850GHz 

2.4G WIFI transport protocol   

802.11 b / g / n
5.8G WIFI transport protocol 802.11 a / n / ac 
2.4G wireless power



802.11n HT20:MCS7\25±2dBm,MCS0\28±2dBm 

802.11n HT40:MCS7\24±2dBm,MCS0\27±2dBm 

5.8G wireless power


802.11n HT20/MCS7/21±2dBm/MCS0/25±2dBm 

802.11n HT40/MCS7/20±2dBm/MCS0/25±2dBm 

802.11ac HT80/MCS9/19±2dBm/MCS0/23±2dBm 

2.4G receiving sensitivity





5.8G receiving sensitivity802.11a/54M/-72dBm/6M/-90dBm 

802.11n HT20/MCS7/-70dBm/MCS0/-88dBm 

802.11n HT40/MCS7/-68dBm/MCS0/-86dBm 

802.11ac HT80/MCS9/-58dBm/MCS0/-85dBm 

2.4G EVM

802. 11n:  ≤ -28 dB

802. 11g:  ≤ -25 dB 

802. 11b:  ≤ -10 dB 

5.8G EVM802.11a_54M: ≤ -25 dB ;802.11n_MCS7: ≤ -28 dB ; 

802.11ac_MCS9: ≤ -32 dB

Interface and power supply


Built in 2.4G omnidirectional antenna, gain: 5dBi

Built in 5.8G omnidirectional antenna, gain: 5dBi

WAN1 10 / 100 adaptive WAN / LAN port, supporting Poe power supply
Status indicatorWAN 
power supplyPOE AC
Supply voltageAC220V
Maximum power consumption<10W
Environmental and physical performance
working temperature  -40 ~ 80℃
Storage temperature-45 ~ 85℃
Humidity (non concentrated)5%~ 95%(No condensation)
size385mm×300mm×135mm(length × width × height)
Installation and fixationL-shaped bracket with U-clamp; diameter of holding pole:Φ30 ~ 50mm 
Special design

IP67 protection level, electromagnetic shielding, wind protection, sun protection, shock proof and heat dissipation design